antabuse

Jewlery Box

written by marieann

Inside the Box

I made this box out of an old shoebox, cardboard, and an old silk shirt. I wanted a way to transport my jewlery in style without worrying about a broken mirror. This is an easy project but you could make it really classy.

Supplies:
Silk shirt (or fabric scraps)
Contrasing fabric (I used black satin)
Ribbon
Shoe box (I had one with an attached lid)
Cardboard scraps
Grey tape

Tools:
Tacky glue (I prefer Aleene’s)
Scissors
Clothes Pins
Popsicle stick (or other spreader)

Instructions:
1. Cut a rectangle of fabric from the shirt material big enough to wrap around the outside of the box. If you line the fabric up just right, you’ll have button holes in the front of the box.
2. Cut a diagonal slit in the corners so that you can neatly fold the fabric toward the inside.
3. Squeeze a thin layer of glue on the outside of the cardboard of the box. Use the stick to spread the glue very smoothly.
4. Press the fabric against the box tucking the ends inside the box. Use clothes pins to hold the fabric in place as it is drying.
5. Use cardboard scraps to build compartments. Make the rectangles as wide as you want the walls of the compartment to be tall and as long as you need them to be to connect to something plus four inches. Fold each edge of the cardboard under two inches (you may need to score the cardboard). Don’t glue them at first, but be sure that they fit. Then cover them in the lining fabric.
6. Using grey tape, tape the folded flaps to the side walls. I made compartments within the compartments so sometimes you may need to glue the walls directly to other compartments.
7. Spread glue over the inside of the box. Be sure that the ends of your fabric are covering the outside fabric which is folded in the inside but does not fold to the outside. Press the fabric pieces along the inside of the box, clipping corners where needed to help the fabric lie flat.
8. Put a thin line of glue with the glue gun over the edges and press ribbon against it. This will hide your unclean ends.
9. Wrap long ribbon pieces around the box and thread thru the button holes to tie. Stuff with pretty jewlery!

Jewlery Box

Leave a Reply

About Us

    We're a pair of young New Yorkers. Caro works in politics and Marie studies law.

    Together, we make stuff -- from yarn, fabric, paper and food. We post tutorials to share our love of craft and inspire you -- 117 project/tutorials and counting (see 'em all here!)

    More about us

    Marie would love to do commissioned work for you or personal swaps -- email her at diynamite@gmail.com

On Flickr