written by threadslinger

I haven’t been quilting since I was born like Miss Marie, so this is all new for me. I decided to start with very simple squares and found some fabric that I thought was pretty cool. I think it turned out good for my first time, but I still feel like I am a lot to learn. This is a good project for any beginner quilters.

Materials

4 different kinds of fabric, any pattern you prefer
Pillow (to put the pillow case around)
Rotary wheel cutter
A quilting mat
Fleece material
Sewing machine
Thread
Sewing scissors
Measuring tape

Directions
(Note: I used a pillow that is 15 inches x 15 inches so all the measurements that I made fit that size. You could easily alter the lengths based on size.)

1. Cut out 16 squares of fabric squares that are 5 x 5 inches (will end up being 3.5 x 3.5 after sewing). I used 5 different fabrics so I had an a few more of some colors, but to make it simple just have 4 different fabrics and cut out four of each kind. Cut using the rotary wheel on your quilting mat.

2. Pin your squares together so that the 1 of each fabric is in each row.

3. Sew along each line, I stared horizontal and then when vertical. Take pins out as you go.

4. After that you should have a quilted square that is about 13 x 13. Now, cut out two pieces of fleece each one being 15 x 10.

5. Sew the fleece to the quilted square starting at the top and then attach it to the sides. Leave the bottom part open (this will be how you tuck in the pillow.) Repeat on the bottom of the square with the other fleece piece until you have an envelope pillow. Tuck pillow into its case and you have just completed your first quilting project. Woot.